october, 2019

17oct10:00 am4805 Alto Manufacturing AuctionAlto Manufacturing Auction10:00 am CDT (GMT-05:00) Auctioneer: PPL Group Auction Type:Timed Online Auction

Auction Header

Alto Manufacturing Auction

Timed Online Auction

Auctioneer

PPL Group

Where

2850 N. Ashland Ave., Chicago, IL 60657

When

2019-10-17 10:00:00 CDT (GMT-05:00)

View & Bid

Contact Us

Auction Details

Presses
Komatsu 150-Ton Gap Frame Press Model OBS-150S-VS-3, SN D0014 (1994), 49.5″ x 31.5″ Bed, 7.87″ Stroke, 17.72″ Shut Height, 27-55 Strokes/Minute with Jaybird Straightener Model J12-1218, SN 2906
Rockford 125-Ton Press Model 8F (#T-81), 20″ Shut Height, 10″ Stroke, 18-40 Stroke/Minute with Air Clutch
Bliss 70-Ton OBI Press (#70), 4″ Stroke, 14.5″ Shut Height, 18-40 Strokes/Minute;
Niagra 45 Ton OBI Press Model M-45, SN 51785 (C-Press #91), 28″ x 18″ Bed, 3.5 Stroke, 18″ x 14″ Slide, 110 Strokes/Minute, with WPC Wintress Clutch/Brake Control & Ax Feed AF-1
Perkins 32 Ton OBI Press Model 32-S, SN 35558 (C-Frame Press #53), 30″ x 15″ Bed, 1.5″ Stroke, 7.75′ Shut Height
Walsh 26-Ton Cut-Off Press Model 26 (#44), SN 11267, 2.5 Stroke, 9.5 Shut Height, 123-240 Strokes/Minute;
Diebel 40-Ton Press (#42), 24″ x 9″ Bed, 2.5 Stroke, 7.75″ Shut Height, 72-360 Strokes/Minute;
Chicago Dries & Krump 25-Ton x 72″ Press Brake Model 355 SP (#38), SN L6110
Marshall Town 22-Ton Press Model No. 3 (#32), 2″ Stroke, 7″ Shut Height, 140 Strokes/Minute,
Moore 17-Ton Knocker Press (#30), 22″ x 10″ Bed, 10″ Shut Height, 1.5 Stroke, 48 Strokes/Minute with Air Feed Table; Marshall 50-Ton Press (#52), 30″ x 18″ Bed Space, 9″ Shut Height, 6″ Stroke, 40 Strokes/Minute with Autotech Control Readout;
Kenco 10-Ton OBI Press Model 104-107-200 (#9), SN 60-160, 175 Strokes/Minute;
Deide 8-Ton Press Model 85 (#7), SN270-5-54, 1.5″ Stroke, 6″ Die Space, 175 Strokes/Minute;
Deide 8-Ton OBI Press (#61) Model 8T:FCO, SN 316-9, 8 Ton Capacity, 2 Stroke, 6″ Die Space, 1″ Adjustable Slide, 200 Strokes/Minute;
Deide 8-Ton Cut-Off Press Model 8FCD (33), SN 892, 1″ Stroke, 6″ Die Space, 190 Strokes/Minute;
Roll-Formers
Dahlstrom 16-Stand Roll Former Model 400-12 OB, SN 1064, 1.5″ Shaft Diameter, 10″ Roll Space, 13″ Horizontal Center, 30 HP Motor; Dahlstrom 20-Ton Cut-Off Press Model 29VP, SN P162, 20-Ton, 3″ Stroke
Dahlstrom 12-Strand Roll Former Model 360-12, SN 332, 1.5″ Shaft Diameter, 8″ Roll Space, 4″-5″ Roll Diameter, 7.5″ HP Motor, Adjustable Height; Dahlstrom Cut-Off Press, 2″ Stroke
Ardcor 12-Stand Roll Former Model1-F, S/N 1600-11, 1.5 Shaft Diameter, 10″ Roll Space, 25 HP Motor, Ardcor Cut-Off Press, 3″ Stroke, 5″-7″ Shut Height
Ardcor 12-Shaft Roll Former Model 1-F, S/N 1655, 1.5″ Shaft Diameter, 10″ Roll Space, 20 HP Motor, Adjustable Height; Ardcor Cut-Off Press, 3″ Stroke
Tishken 10-Stand Roll Former, 1.25″ Shaft Diameter, 8″ Horizontal Shaft Center, 4.5 Center to Bed, Adjustable Height; T-10 Coil Reel
Dahlstrom 8-Shaft Roll Former Model 360-OB, SN 134, 1.5″ Shaft Diameter, 10″ Roll Space, 20 HP Motor, Adjustable Height; Ardcor Cut-Off Press, 3″ Stroke
Ardcor 8 Stand Roll Former, 1.25″ Shaft Diameter, 6″ Horizontal Shaft Center, 3″ Roll Space, Adjustable Height; Deide 8-Ton Cut-Off Press Model 83 (#8), SN 263-9-54, 1.5 Stroke, 6″ Die Space; Littell No. 10 Centering Wheel, 1,000 Lbs Capacity
Dahlstrom 8-Strand Roll Former (#D8), 1.25″ Diameter, 3″ Roll Space
Yoder 7-Shaft Roll Former, 1.5″ Shaft Diameter, 7″ Horizontal Shaft Center; Dahlstrom Cut-Off Press, 2″ Stroke
Coil Reels & Cut-Off Presses
Dahlstrom 12-Ton Cut-Off Press Model 12TP, SN P-551, 3″ Stroke, 6.5-8″ Shut Height
Accra-Flex 3,500 Lbs Powered Uncoiler
Accra-Flex 3,500 Lbs Powered Uncoilder (#2)
Littell 600 Lbs Dual Coil Feeder Reel
Littell Coil Reel Model 40-18 (#Y-20)
Toolroom Equipment
Chevalier Automatic Surface Grinder Model FSG-3A1020, SN M3784018, 10″ x 20″ Table with Magnetic Chuck
Boyer Schultz 6-12 Deluxe Surface Grinder with Magnetic Chuck
(4) Bridgeport Vertical Mills
South Bend 17″ Engine Lathe Model Turn-nado, SN 74GJ-2572 with Cross Feed & Tailstock
South Bend 6″ Model A Engine Lathe, SN 72574KR12 with Cross Feed & Tailstock
Wilson Rockwell Hardness Tester Model 3-JR, SN 3 JR-5037
General Equipment
Miller Portable Spot Welders Model LMSW-52T, on Carts
Stone Double Miter Notching Saw Model DM-10, SN C36E, 10″ Blade
Alfamachine Italy 71″ Frame Saw; Rigid Chop Saw Model CM14500, SN 0536 32101;
Avey Drill Press
Walker-Turner Drill Press
Meba Horizontal Bandsaw Model 320 HBS
Assorted Famco & Greenard Arbor Presses
Dynaric Strapper Model DF20 Strapper
Delta Drill Press, Buffalo Drill Press
Famco Manual Shear Model G18-36
Forklifts
CAT 5,000 Lbs LP Forklift Model G025, SN 4EM01271, 4,329 Hours Indicated
Komatsu 2,000 Lbs LP Forklift Model FG15ST-15, SN 260073A, 5,208 Hours Indicated
Air Compressor & Dryer
Atlas Copco 100-HP Air Compressor Model GAU509, SN ARR S78 10U
Atlas Copco Air Dryer FD95, SNCAQ421396 (2010)
AND MUCH MORE!

Auction Inspection

Day Prior to Auction or By Appointment Only

Terms & Conditions

Terms and conditions

Everything will be sold to the highest bidders for cash, in accordance with the auctioneers normal Terms of Sale which can be found on our web sitewww.pplgroupllc.comor by requesting a copy of our terms and conditions of sale by email tosales@pplgroupllc.com. Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with PPL. All bids are in US dollars. An 18% Buyers Premium will be added to all items sold. PPL makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of PPL`s control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding over the WEB.

Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied. On occasion, we may have additional information regarding an item being auctioned and will be announced during the auction process.

Payments by All successful bidders can pay by wire transfer,cash, cashier’s check, or company check accompanied by a bank letter of guarantee. No Credit Cards are accepted.All successful bidders will receive their invoices via email from PPL the day after the auction sale.

Taxes:All successful bidders will be responsible for sales taxes which will be added to your invoice unless an exemption certificate is supplied prior to invoicing.


Refunds:No refunds or adjustments will be made once an item has been removed from the auction site. All refunds and adjustments are solely at the discretion of the auction company.


Removal:Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to PPL. Removal may begin when the auction has been completed and payment in full received.

Currency

$

BP

Tax/VAT/GST

X